• 0401 296 333

SAGA PRODUCTS

Nilian is the proud distributor and service arm of GAIN Electronic Co. Ltd, a professional manufacture for “Industrial Radio Remote Controller", which has been involved in the development and production of advanced SAGA Radio Remote Controller systems that brings a safer environment and higher efficiency for operators.

GAIN is not only a pioneer & leading remote controller maker in Taiwan, but also an international company with ISO9001: 2000 certificate. GAIN fully design, manufacture and test all our products within their our own R&D department. With complete advanced facilities & equipment to meet various applicants and customers specific needs. Nilian as the distributor in Australia & New Zealand offers the sale and technical support for the products listed below.

SAGA1 - V6 Transportation Radio Remote Control

SAGA1-V6 - Transportation Radio Remote Control

A radio remote system developed for Tow Truck / Trailer / Winches / Hydraulic System. It also applies for Industrial Door / Gate / Barrier control and other industrial fields.

SAGA1-V6: 6 Functions Buttons with 2 Start Buttons + Stop (Receiver w/o pushbutton panel)

Transmitter unit

Transmitter unit

SAGA1-V6: 6 Functions Buttons with 2 Start Buttons + Stop (Receiver w/o pushbutton panel)

Transmitter unit

Transmitter unit

FEATURES

  • SMART Radio Communication
    It helps operator monitor the radio signal status with this new RF technology.
  • Auto Channel Selection (ACS)
    This feature creates a near non-interference from other systems
  • Receiver pushbutton panel (Optional)
    A pushbutton panel available on receiver for emergency i.e. transmitter lost/damaged
  • Remote Pairing
    It’s easy and simple to register a replacement transmitter without any tool required.
  • PC Software Programmable
    It allows you to program the function of button, frequencies etc. through software
  • NC/NO Relay
    All relays are NC/NO type to meet all application requirements
  • Water/Dirt Resistant
    Robust casing for all weather condition
  • Password power-on mode
    It provides several power-on modes such password for authorized operator
  • Pre-assembled receiver cable
    Easy and quick installation

TECHNICAL DATA

Frequency Band868 MHz/ 915 MHz (Frequency might be varied on different region)
Numbers of available relay

8 Function Relays + Stop

Relay RatingNC/NO Max. 20A
Transmitter Power2 AA Size Battery (Alkaline / Rechargeable Ni-MH)
Receiver Power Supply >10~42 VDC
Operating Temperature-40℃ ~ +85℃
Reaction Time< 0.1 Sec
AntennaInternal
LED Power Indicator

3 Stages Power Indicator

TX Dimension/Weight112mm(L)*62mm(W)*39mm(H) /135g (w/o Batteries)
RX Dimension/Weight130mm(L)*146mm(W)*64mm(H)/490g/525g(with panel)

FEATURES

  • SMART Radio Communication
    It helps operator monitor the radio signal status with this new RF technology.
  • Auto Channel Selection (ACS)
    This feature creates a near non-interference from other systems
  • Receiver pushbutton panel (Optional)
    A pushbutton panel available on receiver for emergency i.e. transmitter lost/damaged
  • Remote Pairing
    It’s easy and simple to register a replacement transmitter without any tool required.
  • PC Software Programmable
    It allows you to program the function of button, frequencies etc. through software
  • NC/NO Relay
    All relays are NC/NO type to meet all application requirements
  • Water/Dirt Resistant
    Robust casing for all weather condition
  • Password power-on mode
    It provides several power-on modes such password for authorized operator
  • Pre-assembled receiver cable
    Easy and quick installation

TECHNICAL DATA

Frequency Band
868 MHz/ 915 MHz (Frequency
might be varied on different region) 
Numbers of available relay
8 Function Relays + Stop 
Relay Rating
NC/NO Max. 20A 
Transmitter Power
2 AA Size Battery (Alkaline / Rechargeable Ni-MH) 
Receiver Power Supply >
10~42 VDC 
Operating Temperature
-40℃ ~ +85℃ 
Reaction Time
< 0.1 Sec 
Antenna
Internal 
LED Power Indicator
3 Stages Power Indicator 
TX Dimension/Weight 112mm(L)*62mm(W)*39mm(H)
/135g (w/o Batteries) 
RX Dimension/Weight 130mm(L)*146mm(W)*64mm(H)
/490g/525g(with panel) 
SAGA1 - K2 Handheld Type

SAGA1- K2 Handheld Type

SAGA1- K2 series have unique outstanding features, alternative in programming simply configure under PC software applied for most heavy loading cranes and equipment.

SAGA1-K2：8 two-step pushbuttons + Rotary Key + EMS button + Alarm(horn)

SAGA1-K2 - Transmitter Unit

SAGA1-K2 - Transmitter unit

TRANSMITTER UNIT:

  1. Power: AA Size Battery x 4
  2. Emission Power: < 10mW
  3. Dimension: 167x154x88mm
  4. Weight : 210 g

RECEIVER UNIT:

  1. Power: 24/48/110/220/380VAC (± 20%)
  2. Dimension: 167x154x88mm
  3. Weight: 2100g

SPECIFICATION:

  1. Frequency Channel: 70 Channels
  2. ID Code: Over 1 Million Sets
  3. Channel Space: 25 KHz
  4. Hamming Distance : >4
  5. Structure : Enhanced Glass-Fiber
  6. Operating Environment: -40℃ ~ +85℃
  7. Operating Distance: Up to 100 M
SAGA1 - K4 Handheld Type

SAGA1- K4 Handheld Type

SAGA1- K4 series have unique outstanding features, alternative in programming simply configure under PC software applied for most heavy Loading Cranes and Equipment.

SAGA1-K4: 12 two-step pushbuttons+A/B Switch+EMS button+Rotary Key+Alarm(horn)

SAGA1-K4 - Transmitter Unit

SAGA1-K4 - Transmitter unit

TRANSMITTER UNIT:

  1. Power: AA Size Battery x 4
  2. Emission Power: < 10mW
  3. Dimension: 274x77x42mm
  4. Weight : 385 g

RECEIVER UNIT:

  1. Power: 24/48/110/220/380VAC (± 20%)
  2. Dimension: 310x160x95mm
  3. Weight: 2900g

SPECIFICATION:

  1. Frequency Channel: 70 Channels
  2. ID Code: Over 1 Million Sets
  3. Channel Space: 25 KHz
  4. Hamming Distance : >4
  5. Structure : Enhanced Glass-Fiber
  6. Operating Environment: -40℃ ~ +85℃
  7. Operating Distance: Up to 100 M
SAGA1 - L6B & L8B Handheld Type

SAGA1- L6B & L8B Handheld Type

SAGA1- L6B & L8B series have unique outstanding features alternative in programming simply configure under PC software applied for monorail, Electric chain hoist, Bridge Crane, and Jib Crane.

SAGA1-L6B：4 two-step pushbuttons (Up, Down, East, West + Rotary Key Switch + EMS button)

SAGA1-L6B - Transmitter Unit

SAGA1-L6B - Transmitter unit

SAGA1-L8B：6 single-step pushbuttons (Up, Down, East, West , South, North + Rotary Key Switch + EMS button)

SAGA1-L8B - Transmitter Unit

SAGA1-L8B - Transmitter unit

TRANSMITTER UNIT:

  1. L x W x H: 163 x 49 x 45 mm
  2. Weight: 250g (w/batteries)
  3. 2 AA size batteries
  4. Low power indicator.
  5. Rotary Key Switch can be replaced instead of Start Pushbutton (click here for image)

RECEIVER UNIT:

  1. L x W x H: 161 x 74 x 52 mm
  2. Weight: 1100g (w/out cable)
  3. Input Voltage: AC type: 24 / 48 / 110 / 220 /380V; DC type: 12 ~24V

SPECIFICATION:

  1. Frequency Control: Crystal.
  2. Low power indicator.
  3. Pushbutton jammed detector.
  4. Operation Range: Up to 100 Meters.
  5. Operating Temperature: -45℃ ~ +80℃.
  6. Power consumption: about 10mA.
  7. Structure: Nylon + Glass Fiber.
  8. Shock resistance.
  9. Function programmable.
Optional Accessories

OPTIONAL ACCESSORIES

1. Software & Interface Cable

  • Program CD ROM + Interface cable for SAGA1-K1, K2, K3, K4
  • Program CD ROM + Interface cable for SAGA1-L10, L10-1, L12, L12-1
  • Program CD ROM + Interface cable SAGA1-L4, L6, L8, L6B, L8B
  • Program CD ROM + Interface cable for SAGA1-L40

SAGA1-L6B - Transmitter Unit

2. Copier

Copier for SAGA1-K1, K2, K3, K4.

Copier for SAGA1-L4, L6, L8, L6B, L8B, L10, L10-1, L12, L12-1, L40.

3. Battery Charger

For SAGA all Series

4. Passive Antenna (VHF/UHF)

Passive Antenna for all SAGA Series

5. Protective Cover

Protective cover for SAGA1-L4, L6, L8

Protective cover for SAGA1-K1, K2, L10, L10-1, L6B, L8B

Protective cover for SAGA1-K3, K4, L12, L12-1

CANT FIND WHAT YOUR LOOKING FOR?

Please send us a short message and we will get in contact with you!

Contact Us

© 2024 Nilian Pty Ltd.

Terms of Trade

Linkedin

Site By OMiDESIGN